Sourdough chocolate cruffin - recipe Sourdough&Olives (2024)

FAQs

How to get fluffier sourdough? ›

Keeping the lid on for the first part of baking allows steam to expand between the gluten fibers to rise the bread and create a fluffy loaf. Step 4: Remove the lid and bake for an additional 12-14 minutes or until the crust is crispy and golden brown. Once you take the lid off, the bread likely won't rise anymore.

One of the most common mistakes is having a dough temperature that's too low for the starter to feed on all the flour in the dough, resulting in a crumb that's dense, with fewer openings. "Starter is happiest and most active at around 75 degrees. If it's a lot colder, the process will be much slower.

It's too cold and needs to be in a warmer spot. The starter is young or was kept in the fridge for a long time and needed more feeds before building a levain. You missed some starter feeds and it needs some time of regular feeding (every 12-24 hours) to become active again.

As with any sourdough recipe, before you start baking bread, you want to make sure that your sourdough starter is as strong as possible. My basic sourdough recipe uses just 50g of starter for 500g of flour (so just 10% of starter).

Perhaps the most common flour found in kitchens, all-purpose flour is incredibly versatile and can be used in a wide range of baked goods, from pillowy Sourdough Dinner Rolls to Sourdough Buttermilk Pancakes. It strikes a perfect balance of softness and structure, making it an ideal choice for various recipes.

Note: As loaves begin to overproof they lose their height and shape. The crumb becomes more dense. The holes become more ragged and irregular in shape. The crust begins to thin and separate from the crumb.

How do you know if sourdough is overworked? Overworked sourdough can become tough and lose its ability to rise properly. If your dough feels tight and is difficult to shape, it might be overworked. Remember, sourdough requires a gentle touch and should not be kneaded as vigorously as other types of bread dough.

1) use a lower protein flour, like all-purpose, 2) push the bulk fermentation time / rise, longer, 3) add a higher percentage of whole wheat flour, 4) de-gas the loaf when shaping. Under-proofing a loaf will also create a more closed crumb but that is undesirable.

If you don't want to put the dough in the fridge for a cold ferment, you can leave it to proof on the counter for a little while. You do need to be careful not to let it over ferment. Ideally, you want the temperature to be on the cooler side (no more than 21C / 69.8F). Let the dough relax into the banneton.

What is the poke test for sourdough bread? ›

To do the poke test, flour your finger and press an indentation into the dough. If it springs back immediately, it is still underproofed and not yet ready for baking. If it slowly springs about halfway back, it is ready for baking.

If your starter gets completely covered on top with bubbles but does not rise, it is healthy but may just be a wet mix. Try reducing the water in your next feeding and see if you have different results. Also, the type of flour you are using can impede the rise of your starter.

It would be best if you discarded some portion of your starter each time you feed it unless you want to continue to let it grow. Eventually, you need to discard the used “food” (flour and water) that's been used to sustain your starter during the last fermentation period.

stir your starter in between feedings - try stirring it twice in between feedings and really give it a chance to get oxygen into the mix. This will help to activate your starter without too much effort.

If you have too much starter compared to the additional flour and water you're adding, your hungry starter consumes all the nutrients and then it's not as bubbly.

My loaf is very dense and didn't rise.

Most likely when this happens, it's not you - it's your starter. If your loaf is dense, has uneven holes and a gummy texture, most likely there wasn't enough active wild yeast in your starter to make the bread develop and rise during baking.

Simply put, you have to control the temperature of the bread. Allowing ample time for your bread dough to rise and the yeast to form will create the holes in the bread that give it a lighter texture. Letting your dough get puffy and grow before it goes into the oven is critical.

So don't leave your dough in a warm oven, on a radiator or in sunlight. It will likely be too warm and will dry out your dough too. Instead, find a cosy spot, with no drafts, for your dough to rise. And, if your sourdough starter is struggling to get going, consider finding it a warmer spot too.

It must be kept alive and well with additional feedings (flour and water) to keep it bubbly and active. Remember, it's a living culture which must be cared for with intent. Otherwise, your bread won't rise. Think of it like a pet that needs to be fed daily, or a house plant that needs water and a sunny window.